Angophora House by Richard Cole Architecture

By • Dec 10, 2013

Angophora House was designed by Richard Cole Architecture, and it is located in Waverton, a suburb on the lower North Shore of Sydney, New South Wales, Australia.

The unique interior mixes the use of steel, wood, and stone, and emphasizes the goal of allowing as much natural light as possible seep inside.

Angophora House by Richard Cole Architecture:

“Built over an escarpment in a densely urbanised heritage conservation area in Waverton, the form of this house responds to the difficult site using the elements of cave, platform and canopy. On entering the house from the upper road, one passes through a curvaceous enclosing concrete wall with rooftop garden over.

Two platforms launch into the space of the valley, extending out from the anchoring escarpment. Insulated timber moveable walls transform the space from warm and enclosing to open and unimpeded.

A sheltering timber lined roof opens to the north, falls in response to the slope of the land and captures framed views of adjacent Angophora trees.

The escarpment is retained, raw and open to the rooms of the lower ground floor. A dramatic lift takes the owners to the garage on the street below.”

Photos courtesy of Richard Cole Architecture

Click any photo to see a larger image - Use buttons or j/k/arrow keys to navigate through the articles

Share your Thoughts