A Home Renovation in Toronto, Canada
By Magaly • Sep 10, 2016
It was designed by rzlbd Architects in 2016 and covers an area of 2,200 square feet.
Instar House by rzlbd Architects:
“Instar House is a minimalist three-storey wood & steel structure, which is located on the southern edge of Allenby, a neighbourhood on the border between North York and Toronto. While carefully responds to the needs and lifestyle of the clients, the house has moulted from the small foot-print of the two-and-a-half storey structure that had occupied the site since early 1950s and was infamously nicknamed as half-house.
The evolution of design was based on a clear distinction between two main volumes which are both stretched east-west: a larger one in grey that contains all the served spaces; and a smaller replica in black that accommodates all the servant spaces. In order to maintain a sense of autonomy all the major glazed openings on the larger volume are connected and the exterior of this modest monolithic mass is rendered in seamless stucco.
The staircase / void which sits on the centre of the larger volume, not only allows for visual communication, also divides each floor level into two sections: on the main floor, a living room on the west and a kitchen / dining banquette on the east; on the second floor, two bedrooms that are connected through a glass bridge which overlooks the kitchen and provides a shared study area for kids; the third floor has been dedicated to a generous master bedroom with the sleeping zone on one side and a roof top patio on the opposite side where clients can enjoy an outdoor hot-tub while looking towards a beautiful park.
The smaller volume facilitates all the utilities and services: a mechanical and laundry room in the basement; a powder room and the entry foyer on the main floor; a shared bathroom and a laundry chute on the second floor; and a master ensuite on the top.”
Photos by: Borxu Talaie
You may use j/k/arrow keys to navigate through the articles